McCain Owens posted an update 3 months, 1 week ago
A plunge cut is a form of cut that goes into the the surface of a material from above. Plunge-cutting using a router should be done with a specific plunge router and a plunge-cutting router bit – a router bit with a bottom cut facility, meaning their cutting edges extend across the bottom from the bit. Other routers are fixed base routers and does not be ideal for making plunge cuts.
Make sure you have the right kind of router bit. Ensure that the bit you decide on was created to plunge-cut, or, the end will spin up against the surface of the material and will probably burn it. Plunge cutting router bits may be labelled as bits using a bottom cut function, but when you’re unsure check the specifications of human bits prior to using them. With all the wrong equipment can damage your machinery as well as your workpiece.
Set the peak of the router bit. In order to plunge-cut down to a specific depth, you must set the depth on the router before working. How you make this happen is determined by the brand of router you choose, but many utilize a type of depth stop (commonly a rod and column) which can be adjusted to the height you might need. The depth stop limits how long into material the part might be lowered. The excitement branded routers have a very 3 turret depth stop that permits you to pre-set 3 separate heights for plunge cutting that can be easily changed because you work.
Step one. Activate the router reducing the part down onto the workpiece.
Step 2. As soon as the bit has cut from the surface, you can move the router to produce your selected cut.
Make deeper cuts progressively! Plunging deeper than several millimetres using a single cut shouldn’t be done. Instead, you need to create a number of shallow cuts which will get progressively deeper. Because of this less strain is scheduled about the cutting edges of the router bit, and so on the router’s motor itself.
Take regular breaks. Every now and then you need to bring the router bit back out of the material change the router off so the motor and router bit can relax, and you may clear any debris through the cut. You should also clear any waste material from your cut to prevent it from becoming clogged. Be sure to make use of an appropriate dust extractor with the routers.
More info about industrial cnc router please visit webpage: